Removing Scratches from Stainless Steel
Steve Hanson
In a perfect world, all of our stainless steel sinks, counters, and appliances would remain as pristine as the day we bought them. Unfortunately, the real world of abrasive cleaners, scouring pads, pots and pans, and countless other culprits can leave unsightly scratches on stainless steel. One well-meaning scrubbing of a stainless steel sink with an aggressive scrub pad can leave visible scratches. People brushing up against a stainless steel refrigerator can leave unwanted marks. Normal wear and tear can damage even the most well-cared-for countertop. Normal cleaners will not remove these scratches, so what can you do? The first piece of advice is to start out with the least aggressive method of removal. If possible, consult the manufacturer for recommended methods of removal. You MUST use care with any of these methods by always rubbing with the grain of the stainless steel. Also, always keep the surface wet to prevent further scratching. It is best to begin any of these methods using a gentle hand. The less aggressive methods may require time and elbow grease, so patience is needed. It should also be noted that many stainless steel appliances are coated with a protective film to help prevent fingerprints. Using these methods can damage these surfaces, so caution is required. Here is a list of methods you can try: Sometimes, minor scratches can simply be concealed through the use of a stainless steel polish. Unfortunately, you must frequently re-apply it on a frequent basis, but it is a small price to pay to keep your products looking great. This may be the best method for appliances covered with protective film, to prevent even more damage. You can purchase products made specifically for scratch removal on stainless steel, such as Scratch B Gone. Many people have had good results with Bar Keeper's Friend, a powdered cleaner safe for stainless steel. Another method is using a rubbing compound, such as those made by 3M. Again, be sure to rub in the direction of the grain. A piece of wet fine-grit sandpaper can also be used to remove deeper scratches. Always keep it wet, and follow up with a rubbing compound. If you need to use a courser-grit paper to remove deeper scratches, follow up with a finer grit, and then finally a rubbing compound. Again, care must be given in using some of these methods, as you could cause more harm than good. Test a small inconspicuous area first, if possible. Time, elbow grease, and the proper product can safely remove scratches and bring your stainless back to its original beauty!
Copyright © MyHouseCleaningBiz.com. All Rights Reserved
Thoughts or comments? Please consider posting them to the
discussion forum
Would you like to reprint this article in your newsletter, on your web site, or on your blog? You sure can! As long as the article is complete and unaltered (including the author information below). Send a copy of the reprint to us by filling out the contact form, including the URL of the published article. (Make sure all links are live if placed in an e-zine, on a web site or blog.)
You must include the following information at the end of each article you reprint:
Copyright © MyHouseCleaningBiz.com. All Rights Reserved.
Steve Hanson has been a building service contractor for more than 20 years and now uses his knowledge to help owners of residential cleaning companies build a more profitable and successful cleaning business at MyHouseCleaningBiz.com. Read inspirational cleaning success stories at http://www.cleaning-success.com, and sign up for House Cleaning Profit Tips at http://www.MyHouseCleaningBiz.com.
| 
Member Login
